Telemecanique Sensors 9013FSG52J25M4 Air-Pump Pressure Switch, NEMA 1, 60-80 psi Pressure Setting, 25-80 psi Cut-Out, 20-30 psi Adjustable Differential, Low-Pressure Cut-Off

This Square D Pumptrol 9013FSG52J25M4 electromechanical pressure switch with 60-80 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPSF internal fluid connection and screw clamp terminals. The switch works with a 1. 5 hp or less pump. The adjustable differential range is 20-30 psi and the cut-out range is 25-80 psi. The low-pressure cut-off (auto-start-off) operates at approximately 10 psig below the cut-in and will turn off the pump. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.

• Pressure Switch - Water or Air
• Pressure Switch used to control electrically driven motors
• Diaphragm Actuated
• Low Pressure Cut Off - operates approximately 10 psi below cut-in